Weapon -250 DC Contactor - Price Adjustment Information

万彩网100线路This article mainly introduces commonly used 250 DC contactors. Firstly, introduce the function of relays. Secondly, it introduces which type of universal relay to use and the types of universal relays. Later, it explained how to choose a relay. A 250 DC contactor is an electronic control device that has a control system (also known as an input circuit) and a controlled system (also known as an output circuit). Usually used in automatic control circuits. In fact, it uses a smaller current to control a larger current "automatic switch". Therefore, it plays a role in automatic adjustment, safety protection, and circuit conversion in the circuit.

Like any relay, the amount of power to be switched and other system considerations may have a significant impact on the overall lifespan of the relay. In fact, the mechanical life of electromechanical relays may be shorter than that of reed relays, but the electrical life under similar loads (especially capacitive loads) may decrease at a much slower rate than that of reed relays. The larger and more robust contacts of electromechanical relays are usually more durable than similar reed relays.

250 DC contactors are usually composed of iron cores, coils, armatures, contact springs, etc. As long as a certain voltage is applied to both ends of the coil, a certain current will flow in the coil, thereby generating electromagnetic effects. The armature will absorb the tension of the reset spring on the iron core under the action of the coil. Electromagnetic force attracts and drives the armature. The moving contact is in contact with the stationary contact (normally open contact). When the coil is powered off, the electromagnetic attraction also disappears, and the armature returns to its original position under the reaction force of the spring, thereby releasing the movable contact and the original static contact (normally closed contact). It is attracted and released, thus achieving the purpose of conducting and turning off in the circuit. For the "normally open" and "normally closed" contacts of relays, they can be distinguished as follows: static contacts that are in a disconnected state when the relay coil is not powered are called "normally open contacts"; The static contact in the connected state is a "normally closed contact".

万彩网100线路According to different classification methods, there are several commonly used types of relays.

(1) According to the working principle: electromagnetic, inductive, electrical, and transistor relays.

(2) According to the measured parameters: current type, voltage type, power type, impedance type and other power relays, as well as temperature type, pressure type and other non electrical silk appliances.

(3) According to functions: intermediate relay, time relay, and signal relay.

There are two types of electromechanical relays: latch type and non latch type. Non self locking relays require continuous current to flow through the coil to maintain relay operation.